Garelli splined Clutch Washer
|
|
Garelli Second Speed Gear
|
|
Garelli Washer
|
|
Garelli Wave Washer
|
|
Our Price: $4.50
|
|
|
|
Our Price: $40.00
|
|
|
|
Our Price: $1.00
|
|
|
|
Our Price: $1.50
|
|
|
|
|
|
|
Garelli splined clutch washer
Garelli part number 000.357.7.122
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli second speed gear
Garelli part number 212.001.7.125
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli washer
Garelli part number 213.849.00
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli wave washer
Garelli part number 214.407.00
NOS Original Garelli
If uncertain as to application please inquire
|
|
|
|
Garelli Wave Washer
|
|
Garelli Wave Washer
|
|
Garelli 30 MPH Headgasket
|
|
Garelli Trans Sprocket
|
|
Our Price: $1.50
|
|
|
|
Our Price: $1.50
|
|
|
|
Our Price: $4.50
|
|
|
|
Our Price: $38.00
|
|
|
|
|
|
|
Garelli wave washer
Garelli part number 214.408.00
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli wave washer
Garelli part number 214.410.00
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli 30 mph head gasket
Garelli part number 216.058.3.232
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli 30 mph head gasket
Garelli part number 216.058.3.232
NOS Original Garelli
If uncertain as to application please inquire
|
|
|
|
Garelli Single Speed Clutch
|
|
Garelli First Gear
|
|
Garelli Freewheel Body
|
|
Garelli Spacer
|
|
Our Price: $75.00
|
|
|
|
Our Price: $40.00
|
|
|
|
Our Price: $35.00
|
|
|
|
Our Price: $3.00
|
|
|
|
|
|
|
Garelli Clutch for single speed engines
Garelli part number 002.391.7.153
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli first gear
Garelli part number 212.001.7.018
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli Freewheel Body
Garelli part number 207.302.7.131
NOS original Garelli
If uncertain as to application please inquire
|
Garelli spacer
Garelli part number 207.303.7.311
NOS original Garelli
If uncertain as to application please inquire
|
|
|
|
Garelli Stepped Nut
|
|
Garelli Sprung Washer
|
|
Garelli Bearing Race
|
|
Garelli Crank Arm Pin
|
|
Our Price: $8.00
|
|
|
|
Our Price: $4.50
|
|
|
|
Our Price: $4.50
|
|
|
|
Our Price: $3.50
|
|
|
|
|
|
|
Garelli stepped nut
Garelli part number 207.303.7.586
NOS original Garelli
If uncertain as to application please inquire
|
Garelli sprung washer
Garelli part number 207.303.7.587
NOS original Garelli
If uncertain as to application please inquire
|
Garelli fork bearing race
Garelli part number 207.3078
NOS original Garelli
If uncertain as to application please inquire
|
Garelli crank arm pin
Garelli part number 000.2074
NOS original Garelli
If uncertain as to application please inquire
|
|
|
|
Garelli Intake Manifold
|
|
Garelli Flanged Nut
|
|
Garelli Long Nut
|
|
Garelli 6 mm Nut
|
|
Our Price: $20.00
|
|
|
|
Our Price: $1.00
|
|
|
|
Our Price: $1.00
|
|
|
|
Our Price: $0.20
|
|
|
|
|
|
|
Garelli intake manifold
Garelli part number 208.051.3.321
NOS original Garelli
If uncertain as to application please inquire
Click pic for additional images
|
Garelli nut
Garelli part number 208.810.00
NOS original Garelli
If uncertain as to application please inquire
|
Garelli nut
Garelli part number 208.815.00
NOS original Garelli
If uncertain as to application please inquire
|
Garelli 6 mm nut
Garelli part number 210.039.00
NOS original Garelli
If uncertain as to application please inquire
|
|
|
|
Garelli 6 mm Washer
|
|
Garelli Swing Arm Bushing
|
|
Garelli Swing Arm Pivot Bolt
|
|
Garelli T-Clamp
|
|
Our Price: $0.10
|
|
|
|
Our Price: $5.00
|
|
|
|
Our Price: $10.00
|
|
|
|
Our Price: $4.00
|
|
|
|
|
|
|
Garelli 6 mm washer
Garelli part number 210.404.00
NOS original Garelli
If uncertain as to application please inquire
|
Garelli swing arm bushing
Garelli part number 003.553.3.152
NOS original Garelli
If uncertain as to application please inquire
|
Garelli swing arm pivot bolt
Garelli part number 003.553.3.153
NOS original Garelli
If uncertain as to application please inquire
|
Garelli T-clamp
Garelli part number 003.553.5.178
NOS original Garelli
If uncertain as to application please inquire
|
|
|
|
Garelli Lever Spacer
|
|
Garelli Brake and Clutch Lever Pivot Bolt
|
|
Garelli 1st Speed Clutch
|
|
Motobecane Diffuser.
|
|
Our Price: $2.50
|
|
|
|
Our Price: $2.50
|
|
|
|
Our Price: $75.00
|
|
|
|
Our Price: $9.00
|
|
|
|
|
|
|
Garelli Spacer for inside brake and clutch lever.
Garelli part number 003.553.5.205
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli pivot bolt for brake and clutch lever.
Garelli part number 003.553.5.516
NOS Original Garelli
If uncertain as to application please inquire
|
Garelli first speed clutch for 2 speed engines.
Garelli part number 000.357.7.153
NOS Original Garelli
If uncertain as to application please inquire
|
Motobecane Gurtner diffuser.
For 25 and 30 MPH Dimoby enigines.
NOS Original Motobecane
|
|
|
|
Motobecane Engine Pivot Spacer
|
|
Motobecane Screw & Nut
|
|
Motobecane Upper Fork Leg Nut
|
|
Motobecane Brake Adjusting Barrel Jam Nut
|
|
Our Price: $4.50
|
|
|
|
Our Price: $1.27
|
|
|
|
Our Price: $4.00
|
|
|
|
Our Price: $2.25
|
|
|
|
|
|
|
Motobecane engine pivot spacer.
NOS Original Motobecane
|
NOS original Motobecane screw and nut.
|
Motobecane upper Fork leg nut.
NOS Original Motobecane
|
Motobecane brake adjuster jam nut.
Made of plastic.
NOS Original Motobecane
|
|
|
|
Motobecane Front Fender Stay Mounting Kit.
|
|
Motobecane Spoke & Nipple for Rear 17 Inch Wheel
|
|
Motobecane 5 mm Air Box Mounting Stud
|
|
Motobecane Crome Fork Top Cover
|
|
Our Price: $8.00
|
|
|
|
Our Price: $2.50
|
|
|
|
Our Price: $3.50
|
|
|
|
Our Price: $6.00
|
|
|
|
|
|
|
Motobecane front fender stay mounting kit
Kit incudes Special Throughbolt. cup and nut
NOS Original Motobecane
|
Motobecane spoke and nipple for 17 inch rear wheel (Models 40 and 50)
NOS Original Motobecane
|
Motobecane air box mounting stud.
5mm type (also available in 6 mm type)
NOS Original Motobecane
|
Motobecane Chrome cap for top of fork
NOS Original Motobecane
|
|
|
|
Motobecane Rubber Fork Washer
|
|
Motobecane Seat - Saddle
|
|
AWESOME RARE Sachs moped collectable! Key fob lights up
|
|
Garelli Vip - Avanti Sprocket and Nut
|
|
Our Price: $2.50
|
|
|
|
Our Price: $48.00
|
|
|
|
Our Price: $15.00
|
|
|
|
Our Price: $15.00
|
|
|
|
|
|
|
Motobecane rubber washer that goes under the chrome trim ring at the top of forks.
NOS Original Motobecane
|
Original Motobecane saddle
NOS
Click pic for additional images
|
Here is a cool RARE NEW OLD STOCK Sachs moped advertising light / key fob / lanyard that we found in our Sachs moped parts inventory.
Procured from Sachs at one of the dealer industry shows.
The lanyard is about 15 inches long and has the sachs name and logo running its length.
A clear polymer crystal like badge with a blue Sachs logo is attached the Lanyard.
The badge is 1.5 inches square and has beveled edges.
Has a groovy 70's era blue neon type light that you can have light up, or flash in fast or slow mode.
Comes with a new and replaceable battery.
Battery may or may not work due to age.
This is a great piece of moped memorabilia for you collectors or wear it while you are riding your moped at night because of its super high visibility.
Click pic for additional images
Truly a rare piece of moped advertising history from an era that many have forgotten about. We've been in the moped industry for over 20 years and have never come across one these before.
|
New 16 tooth front sprocket and sprocket nut. Fits Garelli VIP and Avanti - Cosmo Stinger VIP Clone engines.
New Take offs from Cosmo Stingers.
NOS
|
|
|
|
Minarelli Connecting Rod kit with Piston
|
|
Universal exhaust Header -muffler seal
|
|
Minarelli Vertical Cylinder Radial Style Cylinder Head
|
|
Minarelli V1LK Engine case set
|
|
Our Price: $50.00
|
|
|
|
Our Price: $5.00
|
|
|
|
Our Price: $50.00
|
|
|
|
Our Price: $60.00
|
|
|
|
|
|
|
New Minarelli connecting rod kit with piston. Includes:
Rod
Lower con rod bearing
Lower Rod pin
Upper cod bushing
38.7 mm piston
Wrist pin.
For V1 and similar engines
NOS
|
New universal exhaust header to muffler seal. Very popular on many Italian mopeds that used a muffler that slipped over the Header. Stepped in the middle for great seal. Made of high heat resistant rubber.
22mm for the header side
24 mm for the muffler side
measure yours to be sure.
NOS
|
NOS Minarelli Radial style air cooled cylinder head. Click pic for additional images.
Applicable on the following Minarelli engines:
C-3
P-4
Possibly P-6
|
NOS Minarelli V1LK engine case set. Case inducted reedvalve. Engines are marked V1L on the right hand case and have machined surface for pedal shaft but have no pedal shaft provisions on the left hand side case.. Great for building up your next Minarelli monster. Click picture for additional images.
|
|
|
|
Dellorto Carburetor SHA 14-12
|
|
Safari Moped Seat
|
|
Safari Moped Seat Cover
|
|
Minarelli Clutch Complere Plane Type
|
|
Our Price: $65.00
|
|
|
|
Our Price: $70.00
|
|
|
|
Our Price: $27.00
|
|
|
|
Our Price: $48.00
|
|
|
|
|
|
|
Dellorto SHA 14-12 carburetor. Includes Steel air filter ,box assembly, throttle cable wire.
These carbs do not come with the plastic intake mounting adapter. Any of the 20 mm OD adapters we offer will work. Just measure the OD of your intake manifold and order the appropriate on.
Click on the pic for additional views.
Specs:
Mount Type - Clamp
Attaches to - Use your existing intake manifold bushing or get a new one (measure your intake manifolds OD)
Choke Type - Lever
Air filter mount - 59 MM
Main Jet -48
Idle Jet - N/A
Starter Jet - N/A
|
NOS Original Safari moped seat. Brand new and great condition. Safari made several different models of seats so compare your seat to the pictures.
|
NOS Original Safari moped seat cover. Restore your original Safari
seat with this Original seat cover. Safari made several different
models of seats so compare your seat to the pictures.
This is only the
cover.
Click the picture to see the type of Safari seat this cover is for and to preview what your seat will look like once it is restored with this new cover.
|
NOS original Minarelli clutch assembly. This is for the stub plane style crankshaft engines only. (Take note of the center mounting hole. It has a flat side machined into it. Not interchangeable with cone type cranks (no flat side)
Applicable to the following Minarelli engines:
V1
V1L
V1HL
|
|
|
|
Minarelli Clutch Hub Stub Plane Type
|
|
Minarelli Clutch Shoe Set
|
|
Minarelli Clutch Shoe Set
|
|
Brand New Morini MO1 Engine
|
|
Our Price: $18.00
|
|
|
|
Our Price: $35.00
|
|
|
|
Our Price: $38.00
|
|
|
|
Our Price: $295.00
|
|
|
|
|
|
|
NOS original Minarelli clutch shoe Hub. This is the hub that the clutch shoes mount in. It is for the stub plane style crankshaft engines only. (Take note of the center mounting hole. It has a flat side machined into it. Not interchangeable with cone type cranks (no flat side)
Applicable to the following Minarelli engines:
V1
V1L
V1HL
|
NOS original Minarelli clutch shoe set. This is a set of 2 shoes. These clutch shoes will work with both style of Minarelli clutch hubs (stub and tapered cone).
Applicable to the following Minarelli engines:
V1
V1L
V1HL
|
NOS original Minarelli clutch shoe set. This is a set of 2 shoes. With 4 # MIN4980 Clutch shoe plate screws and 2# MIN4970 clutch shoe mounting plates already installed. These clutch shoes will work with both style of minarelli clutch hubs (stub and tapered cone)
Applicable to the following Minarelli engines:
V1
V1L
V1HL
|
Franco Morini Single Speed Piston Port Engine.
Model MO1
Found on many mopeds manufactured up to 1979.(some later models used this engine also until the stock was depleted)
Intake manifold mounts to the cylinder
These particular engines have the 12 tooth front sprocket and the 12 mm intake manifold.
Complete ready to bolt on . Just add your carburetor, exhaust, and engine oil.
Click picture for additional images.
|
|
|
|
GENERAL / LAZER REAR SPROCKT 40 TEET
|
|
UNIVERSAL 6 VOLT AC HORN
|
|
UNIVERSAL ROUND HEADLIGHT ASSY
|
|
ITALIAN BRAKE SHOE SET
|
|
Our Price: $20.00
|
|
|
|
Our Price: $14.00
|
|
|
|
Our Price: $18.00
|
|
|
|
Our Price: $18.00
|
|
|
|
|
|
|
Rear sprocket as used on Geneal and Lazer models
3 mounting holes
40 teeth
slight dish to sprocket
NOS original General
|
This is a universal horn for many 6 volt ac mopeds
Made in Japan
Has rubber isolation mounting
Has mounting bracket with 2 mounting holes
|
Universal round headlamp
Uses standard single or dual filament ba15S type bulbs
Chrome plastic bezel with black plastic bucket
Bulb not included
Click the picture for additional photos
|
Original equipment on many Italian Mopeds with Grimeca spoke wheels
Hub diameter = 90mm
Brake lining thickness = 3.8mm
Brake lining width = 18mm
Brake lining length = 79mm
Springs = 2 included
NOS
|
|
|
|
PERFORMANCE ITALIAN BRAKE SHOE SET
|
|
PERFORMANCE ITALIAN BRAKE SHOE SET
|
|
ITALIAN BRAKE SHOE SET
|
|
AXLE JAM NUT 12MM
|
|
Our Price: $22.00
|
|
|
|
Our Price: $22.00
|
|
|
|
Our Price: $18.00
|
|
|
|
Our Price: $2.00
|
|
|
|
|
|
|
High performance brake shoes applicable to many Italian Mopeds with Grimeca spoke wheels
Manufactured by Ferodo
Photo shows 2 sets of shoes
Hub diameter = 90mm
Brake lining thickness = 3.8mm
Brake lining width = 18mm
Brake lining length = 79mm
Springs = 2 included
NOS
|
High performance brake shoes applicable to many Italian Mopeds with Grimeca Mag wheels
Manufactured by Ferodo
Photo shows 2 sets of shoes
Hub diameter = 90mm
Brake lining thickness = 3.8mm
Brake lining width = 18mm
Brake lining length = 79mm
Springs = Uses single V shaped spring not included with performance shoes.
NOS
|
Original equipment on many Italian Mopeds with Grimeca Mag wheels
Hub diameter = 90mm
Brake lining thickness = 3.8mm
Brake lining width = 18mm
Brake lining length = 79mm
Springs = Uses single V shaped spring Included
NOS
|
Axle jam nut for 12 mm axles
12mm X 1
6 mm thick
|
|
|
|
PUCH AXLE NUT, M11X1 ,1OMM HIGH
|
|
SPRING,BRAKE SHOE
|
|
PUCH REAR BRAKE PLATE
|
|
Tecno Hunter exhaust for Puch
|
|
Our Price: $2.00
|
|
|
|
Our Price: $1.50
|
|
|
|
Our Price: $40.00
|
|
|
|
Our Price: $70.00
|
|
|
|
|
|
|
Puch 11 mm axle nut
11 mm x 1.0
10 mm wide
NOS original Puch
|
Puch Brake shoe return spring
Manufactured by Leleu
For use with spoke wheels and 5 star mag wheels
Notice the spring has an hourglass shape to it to prevent chaffing
NOS original Puch
|
Original brake plate for Puch spoke and 5 star mag wheels.
Manufactured by Leleu
Includes 2 brake pad inspection plugs
NOS original Puch
|
Tecno Hunter exhaust for Puch.
All maxi models and 1 speed magnum and cobra models.
For 2 speed magnums exhaust manifold must be modified.
removal of center stand a must possible interference with crank arms too.
|
|
|
|
CEV IGNITION POINTS
|
|
DANSI IGNITION POINTS
|
|
PUCH KICK START E-50 CLUTCH COVER GASKET AFTERMARKET
|
|
CEV IGNITION POINTS
|
|
Our Price: $20.00
|
|
|
|
Our Price: $20.00
|
|
|
|
Our Price: $2.50
|
|
|
|
Our Price: $16.00
|
|
|
|
|
|
|
NOS original CEV Ignition points for the following models
:
Baretta with Franco Morini engine
Bianch with Franco Morini engine
Cosmopolitan Motors with Dansi magneto
Demm Smiley
Garelli with CEV 6933 magneto
Garelli Monza
General mopeds with Franco Morini engine
Intramotor with Franco Morini engine
Malaguti with Dansi Magneto
Motobecane Sebring
Motomarina Sebring with Franco Morini engine
Negrini with Dansi magneto
Pacer with Dansi magneto
Scorpion
Snark Star, Stardust, and Satellite models
Tomos with CEV magneto
NOS original CEV
|
NOS original DANSI Ignition Points
NOS original DANSI
|
Puch clutch cover gasket for 1 speed kick start E-50 engines found on Puch JMX and Magnum X mini cycles.
Aftermarket manufacturer
|
NOS original CEV Ignition points for the following models
:
Baretta with Minarelli engine
Easy Rider
Gadabout
Garelli with CEV 6939 magneeto
General mopeds with Minarelli engine
Intramotor with Minarelli engine
Lambretta scooters (all 125's, all 150's, all 175's, 200SX, and 200 Deluxe
Moto Bee
Motomarina JR
Motomarina Raven with Minarelli engine
Motomarina Tri-Power
Motoguzzi Robin and G-2 with Dansi magneto
Motron
Snark Eagle
NOS original CEV
|
|
|
|
PUCH 1 SPEED E-50 CLUTCH CABLE
|
|
PUCH TOOL BAG
|
|
PUCH MAXI EXHAUST GASKET
|
|
PUCH CRANK PIN NUT
|
|
Our Price: $8.00
|
|
|
|
Our Price: $48.00
|
|
|
|
Our Price: $2.50
|
|
|
|
Our Price: $1.00
|
|
|
|
|
|
|
Puch clutch cable for 1 speed engines
quality aftermarket
Heavy duty
|
Puch under seat tool bag
Tools sold seperatly
Very rare
Only offered by puch for 1 year 1976
NOS original Puch
|
Puch Maxi exhaust gasket
Quality aftermarket manufacturer
|
Puch hex nut forpPedal crank arm pin
NOS original Puch
|
|
|
|
PUCH SHOCK MOUNT NUT
|
|
PUCH CRANKSHAFT SUPPORT PLATE
|
|
PUCH ENGINE REPAIR STAND
|
|
PUCH MAXI PROP STAND BUMPER
|
|
Our Price: $3.00
|
|
|
|
Our Price: $17.00
|
|
|
|
Our Price: $38.00
|
|
|
|
Our Price: $3.00
|
|
|
|
|
|
|
Puch shock mount nut
M8 X1.25
NOS original Puch
|
Puch factory crankshaft support plate NOS original Puch
|
Puch factory engine repair stand for use on both 1 and 2 speed Puch engines mounts in vice NOS original Puch
|
Puch Maxi kickstand rubber bumper
NOS original Puch
|
|
|
|
PUCH MAGNUM / COBRA AIR FILTER ELEMENT
|
|
PUCH PAN HEAD SCREW M6X15
|
|
PUCH BRAKE LEVER PIVOT BOLT
|
|
PUCH SPEEDOMETER DRIVE UNIT FOAM SEAL
|
|
Our Price: $19.00
|
|
|
|
Our Price: $1.50
|
|
|
|
Our Price: $2.00
|
|
|
|
Our Price: $2.00
|
|
|
|
|
|
|
Puch air filter element
Magnum
Cobra
Freespirit
Pinto
NOS original Puch
|
Puch pan head screw
M6X15
NOS original Puch
|
Puch brake lever pivot bolt
Made by Magura
NOS original Puch
|
Puch speedo drive foam seal
Size = 36 x 18
NOS original Puch
|
|
|
|
PUCH MAXI HEADSET UPPER BEARING RACE
|
|
PUCH MAXI HEADSET BEARING CUP
|
|
PUCH MAXI LOWER HEADSET BEARING RACE
|
|
PUCH SEAT POST
|
|
Our Price: $7.00
|
|
|
|
Our Price: $5.00
|
|
|
|
Our Price: $5.00
|
|
|
|
Our Price: $16.00
|
|
|
|
|
|
|
Puch Maxi steering headset upper race
NOS original Puch
|
Puch Maxi steering headset bearing cup
Upper and lower cup are the same
NOS original Puch
|
Puch Maxi steering headset lower race
NOS original Puch
|
Puch Maxi seat post
Chrome
NOS original Puch
|
|
|
|
PUCH 2 SPEED ZA50 TRANSMISSION COVER SCREW
|
|
PUCH 2 SPEED ZA50 TRANSMISSION COVER SCREW
|
|
PUCH HEX NUT M10X1.5
|
|
PUCH HEX NUT M6X1
|
|
Our Price: $5.00
|
|
|
|
Our Price: $5.00
|
|
|
|
Our Price: $2.00
|
|
|
|
Our Price: $0.75
|
|
|
|
|
|
|
Puch 2 speed ZA50 transmission cover screw55 mm long This is the flat head style NOT interchangeable with the phillips head style NOS original Puch
|
Puch 2 speed ZA50 transmission cover screw 70 mm long This is the flat head style NOT interchangeable with the phillips head style NOS original Puch
|
Puch hex nut
10mm x 1.5
NOS original Puch
|
Puch hex nut
6mm x 1
NOS original Puch
|
|
|
|
PUCH HEX NUT M12 X 1.5
|
|
PUCH THROTTLE CABL AJUSTONG NUT
|
|
PUCH SQUARE NUT M6 X 1
|
|
PUCH 2 SPEED ZA50 CRANKSHAFT MAIN BEARING L-17 MAGNEETO SIDE
|
|
Our Price: $2.00
|
|
|
|
Our Price: $1.00
|
|
|
|
Our Price: $2.50
|
|
|
|
Our Price: $65.00
|
|
|
|
|
|
|
Puch nut
12mm x 1.5
NOS original Puch
|
Puch jam nut for throttle cable adjuster
NOS original Puch
|
Puch square nut
6mm X 1
NOS original Puch
|
Puch 2 speed ZA50 crankshaft main bearing
Magneeto side
L-17 bearing
Made by Styre in Austria
Expensive yes but original
For budget minded builds see our product # 90026007AM
NOS original Puch
|
|
|
|
PUCH 2 SPEED ZA50 CRANKSHAFT MAIN BEARING L-17 MAGNEETO SIDE
|
|
PUCH REAR SPROCKET 45 TEETH
|
|
PUCH PISTON RING OVERSIZE 38.25 x 2MM
|
|
PUCH FRONT FENDER CABLE GUIDE
|
|
Our Price: $35.00
|
|
|
|
Our Price: $22.00
|
|
|
|
Our Price: $9.00
|
|
|
|
Our Price: $4.50
|
|
|
|
|
|
|
Puch 2 speed ZA50 crankshaft main bearing
Magneeto side
L-17 bearing
Aftermarket nice quality
May have brass or nylon bearing retainer depending on availability
An inexpensive alternative to our NOS Puch bearing MWH # 90026007
|
Puch rear sprocket
45 tooth
NOS original puch
|
Puch oversize piston ring
Diameter = 38.25mm
Thickness = 2 mm
AKA Puch part # 3503101601
NOS original Puch
|
Puch front fender cable guide
AKA Puch part #3501270031
NOS original Puch
|
|
|
|
PUCH MAGNUM FORK LOCK TENSION SPRING
|
|
PUCH MAGNUM FUEL TANK SUPPORT REAR
|
|
PUCH MAGNUM EARLY STYLE UPPERSTEERING SET
|
|
PUCH REAR WHEEL AXLE SPACER
|
|
Our Price: $3.00
|
|
|
|
Our Price: $22.00
|
|
|
|
Our Price: $35.00
|
|
|
|
Our Price: $6.00
|
|
|
|
|
|
|
Puch magnum fork lock spring
for use on NON neieman lock assembly typically found on 1980 and newer magnum models
NOS original Puch
|
Puch Magnum rear fuel tank rubber mount.
NOS original Puch
|
Early puch magnum upper steering headset assembly
This is only the upper bearing assembly
NOS original Puch
|
Puch rear wheel axle spacer
Goes between sealed bearings
Size = 16mm x 13mm x 70mm
Check your size
NOS original Puch
|
|
|
|
PUCH LOWER SPEDOMETER CASE
|
|
PUCH LEFT HAND SIDE GRIP
|
|
PUCH BRAKE LEVER PIVOT NUT
|
|
PUCH HAND CLUTCH LEVER
|
|
Our Price: $4.50
|
|
|
|
Our Price: $6.00
|
|
|
|
Our Price: $1.50
|
|
|
|
Our Price: $8.00
|
|
|
|
|
|
|
Puch speedometer housing lower half
NOS original Puch
|
Puch grip left hand side.
Manufactured by Magura.
NOS original Puch
|
Puch brake lever plastic locknut.
NOS original Puch
|
Puch clutch lever at handlebars
Plastic with cable mounting screw
Made by Magura
NOS original Puch
|
|
|
|
PUCH CLUTCH TENSION SPRING
|
|
PUCH CLUTCH TENSION ADJUSTING SCREW,M10X1X7,5
|
|
PUCH STARTER CLUTCH PRESSURE PLATE
|
|
PUCH CLUTCH PLATE TENSION SPRING CLIP
|
|
Our Price: $4.50
|
|
|
|
Our Price: $2.50
|
|
|
|
Our Price: $14.00
|
|
|
|
Our Price: $4.00
|
|
|
|
|
|
|
Puch clutch adjusting spring for 1 speed E-50 engine
Used on both 2 and 3 shoe clutches. Made by puch for puch. May not work well on lesser quality aftermarket clutches.
NOS original Puch
|
Puch adjusting screw used to tension the clutch springs for 1 speed E-50 engine
Used on both 2 and 3 shoe clutches. Made by puch for puch. May not work well on lesser quality aftermarket clutches.
NOS original Puch
|
Puch starter clutch pressure plate for 1 speed E-50 engine
NOS original Puch
|
Puch tension clip that retains the starter pressure disc for 1 speed E-50 engine
NOS original Puch
|
|
|
|
PUCH STARTER PLATE THRUST BOLT
|
|
PUCH STARTER PLATE THRUST WASHER
|
|
PUCH STARTER / DECLUTCHING LEVER
|
|
PUCH MAXI FUEL TANK CAP
|
|
Our Price: $12.00
|
|
|
|
Our Price: $4.00
|
|
|
|
Our Price: $15.00
|
|
|
|
Our Price: $30.00
|
|
|
|
|
|
|
Puch starter plate thrust bolt for 1 speed E-50 engine
NOS original Puch
|
Puch starter plate thrust washer for 1 speed E-50 engine
size = 15mm x 5mm x 1mm
hardened and ground
NOS original Puch
|
Puch starter lever / declutching lever
1 speed E-50 engine
NOS original PUCH
|
Fuel tank cap for maxi
Chrome
Includes gasket
Includes oil filler cup
NOS original Puch
|
|
|
|
PUCH MAXI OIL MEASURE CUP
|
|
PUCH MAXI NEWPORT OIL TANK CAP
|
|
PUCH MAXI FUEL CAP GASKET
|
|
PUCH MAXI FUEL TANK CAP WITH EMBOSSED LOGO
|
|
Our Price: $12.00
|
|
|
|
Our Price: $16.00
|
|
|
|
Our Price: $3.50
|
|
|
|
Our Price: $45.00
|
|
|
|
|
|
|
Oil measure cup that mounts to original Puch Maxi gas caps.
NOS original Puch
|
This is the cap for the oil tank that came on the oil injected Puch Newport.
NOS original Puch
|
Fuel tank cap gasket for Puch Maxi.
NOS original Puch
|
Fuel tank cap for maxi
Chrome
Embossed puch logo
Includes gasket
Includes oil filler cup
NOS original Puch
|
|
|
|
PUCH MAXI FUEL PETCOCK/VALVE ATTACHING NUT
|
|
PUCH BRAKE LEVER RETURN SPRING LH
|
|
PUCH MAXI SPORT REARSEAT SUPPORT
|
|
PUCH SPACING WASHER 16/11.2/4.7
|
|
Our Price: $3.00
|
|
|
|
Our Price: $4.00
|
|
|
|
Our Price: $6.00
|
|
|
|
Our Price: $3.00
|
|
|
|
|
|
|
This is the nut that attaches the fuel valve to the frame for a Puch maxi.
Not normally available separately.
NOS original Puch
|
Brake lever return spring used on many magura control assemblies.
NOS original Puch
This is for the rear brake lever (left hand side).
|
Rear support bracket for Puch Maxi sport seat.
NOS original Puch
|
|
|
|
|
PUCH REAR SHOCK SPRING COVER BLACK PLASTIC
|
|
PUCH KICKSTAND MOUNTING BLOCK
|
|
PUCH MAGNUM / COBRA FUEL TANK CAP WITH EMBOSSED LOGO
|
|
PUCH MAGNUM / COBRA FUEL CAP GASKET
|
|
Our Price: $12.00
|
|
|
|
Our Price: $12.00
|
|
|
|
Our Price: $50.00
|
|
|
|
Our Price: $3.50
|
|
|
|
|
|
|
Black plastic shock spring cover
NOS original Puch
|
Bearing block for mounting Puch kickstand to engine.
NOS original Puch
|
Fuel tank cap for Puch Magnum and Cobra
Chrome
Embossed Puch logo
Includes gasket
NOS original Puch
|
Fuel tank cap gasket for Puch Magnum and Puch Cobra.
Size 58.5mm x 38mm x 2.5mm
NOS original Puch
|
|
|
|
PUCH GREASE NIPPLE FOR PEDAL SPINDLE
|
|
PUCH TRANS FLUID FILL SCREW E-50 1 SPEED
|
|
BUSHING 12.5/9.5/7 MAGNUM X
|
|
PUCH THREADED ROD UPPER SHOCK MOUNT
|
|
Our Price: $7.00
|
|
|
|
Our Price: $4.50
|
|
|
|
Our Price: $3.50
|
|
|
|
Our Price: $9.00
|
|
|
|
|
|
|
Grease injection nipple for pedal crank spindle
NOS original Puch
|
Puch transmission fluid fill ? Level check screw
for 1 speed E-50 engine
NOS original Puch
|
Puch magnum X bushing
Size = 12.5mm x 9.5mm x 7 mm
NOS original Puch
|
Puch threaded rod for upper shock mounting.
NOS original Puch
|
|
|
|
PUCH RETURN SPRING, REAR BAR
|
|
PUCH FLYWHEEL BOSCH 1215254658
|
|
PUCH BEARING CUP 29X10.5
|
|
PUCH AXLE NUT M11X 1 5MM HIGH
|
|
Our Price: $7.00
|
|
|
|
Our Price: $60.00
|
|
|
|
Our Price: $6.00
|
|
|
|
Our Price: $3.00
|
|
|
|
|
|
|
Brake plate return spring
NOS original Puch
|
Flywheel
NOS original Puch
If uncertain as to application please inquire.
|
Wheel bearing cup
NOS original Puch
|
Puch axle nut
axle size 11X1
Nut height 5 mm
NOS original Puch
|
|
|
|
SIDE REFLECTOR,RED REAR
|
|
BLINKER/HORN SWITCH
|
|
PUCH MAXI SPORT SEAT POST
|
|
PUCH TAIL LIGHT LENS
|
|
Our Price: $5.00
|
|
|
|
Our Price: $72.00
|
|
|
|
Our Price: $38.00
|
|
|
|
Our Price: $35.00
|
|
|
|
|
|
|
Rear red reflector as used on many Puch models
NOS original Puch
|
Super Rare
Horn and directional switch for Puch Magnum MKII and Magnum LTD
NOS original Puch
|
Seat post for Puch Maxi Sport.
NOS original Puch
|
Puch rear tail light lens , this lens is more expensive than the standard lens because it has the rare yellow reflective sides as opposed to the standard red sides. See second picture for side view.
NOS original Puch
|
|
|
|
Gilardoni 80 cc Puch Piston Ring set
|
|
Gilardoni 80 cc Puch Gasket set
|
|
Cat-Eye Directional SwitchAssy
|
|
Universal Handlebar Switch
|
|
Our Price: $50.00
|
|
|
|
Our Price: $20.00
|
|
|
|
Our Price: $23.00
|
|
|
Our Price: $19.00
Sale Price: $13.00
You Save $6.00!
|
|
|
|
|
|
|
Genuine Gilardoni Piston ring set (when these are sold out, only the Metrakit rings will be available) for Puch 80 cc Kit (our kit part # 505).
SPECIAL****A 50% Discount will be applied to this item for our loyal customers who have purchased their kit through Moped Warehouse**** Please notify us if you Qualify for Discount.
|
Genuine Gilardoni gasket set set for Puch 80 cc Kit (our kit part # 505).
SPECIAL****A 50% Discount will be applied to this item for our loyal customers who have purchased their kit through Moped Warehouse**** Please notify us if you Qualify for Discount.
|
New Old Stock Cat-Eye directional Switch assembly as found on Cat-Eye and Gadabout BL-700 and BL-1000 rechargeable systems
|
Universal handlebar mount switch. Has 2 momentary buttons and 3 position toggle switch. Oval shape with chrome cover. fits standard 7/8 inch handlebar. With a little ingenuity you can make this switch work on most any moped. has about 2 feet of shrinkwrapped wire attached to switch.
|
|
|
|
Vespa Bravo Fuel Petcock / Fuel valve
|
|
6 mm X 14 mm Cable Knarp
|
|
6 mm X 9 mm Cable Knarp
|
|
5 mm X 7 mm Cable Knarp
|
|
Our Price: $15.00
|
|
|
|
Our Price: $1.50
|
|
|
|
Our Price: $1.50
|
|
|
|
Our Price: $1.50
|
|
|
|
|
|
|
|
Vespa Bravo fuel Petcock.
|
Universal cable knarp for making your own custom cables.
|
Universal cable knarp for making your own custom cables.
|
Universal cable knarp for making your own custom cables. Perfect size for attaching throttle cable to many style of throttle assemblies.
|
|
|
|
Italian Anchor Bolt Style Cable Knarp
|
|
8 mm X 15 mm Cable Knarp
|
|
6 mm X 20 mm Cable Adjuster Knarp
|
|
Magura Cable Holdfast Knarp
|
|
Our Price: $2.25
|
|
|
|
Our Price: $2.00
|
|
|
|
Our Price: $1.50
|
|
|
|
Our Price: $1.00
|
|
|
|
|
|
|
|
Italian anchor bolt style brake cable knarp
|
Universal cable knarp for making your own custom cables.
|
Universal cable adjuster knarp for 6mm threads with jamnut.
|
For attaching cable to lever on many Magura and similar controls. NOT FOR USE ON TOMOS PLASTIC BRAKE LEVERS !!
|
|
|
|
Exhaust mount Gasket Puch/Tomos
|
|
Batavus Brake Shoe Set
|
|
Batavus Clutch Spring / Centrifugal Weight Assy.
|
|
Avanti Carburetor Complete
|
Our Price: $3.50
Sale Price: $2.00
You Save $1.50!
|
|
|
|
Our Price: $22.00
|
|
|
|
Our Price: $34.00
|
|
|
|
Our Price: $68.00
|
|
|
|
|
|
|
|
This is an over sized (perfect for kits and or pipe upgrades) reinforced exhaust mounting gasket that will work on Puch and Tomos models.
|
Original equipment brake shoe set for all Batavus moped models with 70 mm diameter brake hub. Font or rear.
|
New Old Stock Batavus Clutch spring / centrifugal weight assembly.
|
New Old Stock Avanti Carburetor complete with choke and air box/filter as used on many Avanti and Yumbo models. Made by Pacco. A division of dellorto.
|
|
|
|
Avanti side mount intake manifold
|
|
Exhaust Header Garelli VIP Engine
|
|
Garelli NOI Pedal Shaft Seal
|
|
Bing 12 mm carburetor For Jawa
|
|
Our Price: $20.00
|
|
|
|
Our Price: $38.00
|
|
|
|
Our Price: $5.00
|
|
|
|
Our Price: $85.00
|
|
|
|
|
|
|
|
New Old Stock Avanti side mount intake manifold.
|
New Old Stoc k Garelli VIP engine exhaust header.
|
Garelli pedalshaft seal for NOI engine.
|
Bing 1/12/167 carburetor complete as shown as used on certain Jawa mopeds.
|
|
|
|
Domino Rear Brake / Starter Lever Assembly
|
|
CEV Horn and light switch
|
|
Motobecane Flexibloc Engine Mount
|
|
Motobecane Throttle Cable
|
|
Our Price: $24.00
|
|
|
|
Our Price: $16.00
|
|
|
|
Our Price: $14.00
|
|
|
|
Our Price: $10.00
|
|
|
|
|
|
|
|
Quality New Old Stock Italian made Dominoe Assembly with Silver perch and Left hand Waffle type grip. Very popular on many Italian models.
|
To be mounted on Domino brand throttle perch
|
Aftermarket Motobecane Flexibloc engine mount bushing.
Applicable to Model 40 and 50 Motobecanes and model 7 (model seven for the left hand side only)
By far the highest quality aftermarket mounts we have found.
Originally Motobecane used different left and right hand side mounts. (Left hand mount had a larger inner diameter and used a spacer. ) Now you will use 2 of these instead and omit the spacer. Part is one engine mount. If doing both sides then order 2.
|
New Old Stock Original Motobecane throttle cable with black sheathing. As used on many Motobecane models.
|
|
|
|
CEV speedometer complete with light socket and mounting bracket
|
|
CEV speedometer console
|
|
Motobecane Ignition Condenser Metal - Round Style
|
|
Tomos front sprocket 26 teeth
|
|
Our Price: $35.00
|
|
|
|
Our Price: $17.71
|
|
|
|
Our Price: $18.00
|
|
|
|
Our Price: $12.65
|
|
|
|
|
|
|
CEV speedometer complete with light socket and mounting bracket
40 MPH 60mm X 35 mm
|
CEV speedometer console
with 60 mm diameter recess for speedometer - designed for use with CEV1211 head lamp
|
NOS original Motobecane / Novi Ignition Condenser. This is the round metal style condenser as opposed to the rectangular plastic style. Do not confuse these with the "made in India " Condenser that many Shops are selling.
|
Front sprocket Tomos 27 teeth
fits all tomos from 1977 to present That have a flat (no offset) sprocket design
|
|
|
|
Kickstand spring
|
|
Puch Side cover knobs ea. SHORT
|
|
Puch Side cover knobs ea. LONG
|
|
Peugeot Tail Light Lens - Diamond Style
|
|
Our Price: $3.80
|
|
|
|
Our Price: $3.00
|
|
|
|
Our Price: $3.00
|
|
|
|
Our Price: $18.00
|
|
|
|
|
|
|
|
Kickstand spring Puch Magnum/ Maxi
|
Puch SHORT moped side cover knob. ea.
|
Puch LONG side cover knob. ea.
|
NOS original Peugeot Tail light lens. Diamond shape. 11 cm wide X 6.5 cm high.
As used on many Peugeot models.
|
|
|
|
Rear wheel adjusters Fits many - pair
|
|
Peugeot 102 Brake Shoe Set
|
|
Puch Maxi N RIGID Side Cover Set BLACK
|
|
Tomos Clutch/ Trans Cover Gasket
|
|
Our Price: $7.59
|
|
|
|
Our Price: $22.00
|
|
|
|
Our Price: $35.00
|
|
|
|
Our Price: $4.00
|
|
|
|
|
|
|
|
Rear wheel adjusters Fits many - pair
|
Original equipment Leleu brake shoes with springs. Fits peugeot 102 model only. Front or rear. FAR SUPERIOR to aftermarket Taiwanese shoes sold elsewhere.
|
Puch maxi side cover set For the Puch Maxi N Rigid (No rear suspension) BLACK
|
Tomos Clutch/ Transmission cover gasket applicable to the following engine models:
A-3
|
|
|
|
Puch E-50 Engine Seal Set
|
|
Bing Float Bowl Gasket for Sachs
|
|
Safari NOS Fuel Petcock / Fuel valve
|
|
Peugeot Rear Brake /Choke Lever Assembly By Magura
|
|
Our Price: $10.00
|
|
|
|
Our Price: $3.00
|
|
|
|
Our Price: $22.00
|
|
|
|
Our Price: $24.00
|
|
|
|
|
|
|
This is a top quality seal set with double lipped and gartered crank seals. Comes with 2 crank seals and 1 output shaft seal. Puch cranks manufactured 1986 and newer as well as some aftermarket crankshaft may require a smaller inner diameter 17/40/7 Clutch side crankshaft seal. If uncertain please inquire with us.
1 17/40/7 Magneto side crankshaft seal
1 22/40/7 Clutch side crankshaft seal
1 17/40/7 Sprocket shaft seal
|
Bing Float Bowl Gasket for models that use sachs engine.
|
New Old Stock Safari fuel petcock as used on many Safari mopeds.
|
Quality New Old Stock Italian made Magura Assembly with Silver perch and Left hand type grip. Original on many Peugeot models.
|
|
|
|
Master Link for pedal chain 1/ 2 X 1/8
|
|
Minarelli Front Sprocket 14 teeth for V1 V1L V1HL
|
|
Minarelli Crankshaft
|
|
Minarelli Piston Wrist Pin
|
|
Our Price: $1.27
|
|
|
|
Our Price: $24.00
|
|
|
|
Our Price: $113.85
|
|
|
|
Our Price: $10.12
|
|
|
|
|
|
|
|
Master Link for pedal chain 1/ 2 X 1/8
|
Minarelli Front Sprocket 14 teeth for V1 V1L V1HL. Due to the large size, on some models you will need to grind or machine the engine case for clearance to use this sprocket .
|
NOS original Minarelli crankshaft . This crankshaft is for engines that have a Stub Plane (the clutch side has a flat ground into it as opposed to the taper style clutch/crankshaft setup). Crankshaft already has a new upper connecting rod bushing installed.
Applicable to the following Minarelli engine models:
V1
|
NOS original Minarelli piston wrist pin . Hardened steel 12 mm X 31.5 mm.
Applicable to the following Minarelli engine models:
V1
|
|
|
|
Minarelli Piston Circlip
|
|
Minarelli Running Clutch Shoe Set
|
|
Minarelli Starting Clutch Shoe Set
|
|
Minarelli Crankshaft
|
|
Our Price: $1.27
|
|
|
|
Our Price: $63.25
|
|
|
|
Our Price: $63.25
|
|
|
|
Our Price: $126.50
|
|
|
|
|
|
|
NOS original Minarelli piston Circlip . These should be replaced every time they are removed.
Applicable to the following Minarelli engines:
V1
V1L
V1HL
C2
|
NOS original Minarelli running clutch shoe for Variator Engine. This is a set of 3 shoes
Applicable to the following Minarelli engines:
C2
|
NOS original Minarelli Starting clutch shoe set for Variator Engine. This is a set of 2 shoes
Applicable to the following Minarelli engines:
C2
|
NOS original Minarelli Crankshaft for Variator Engine.
Applicable to the following Minarelli engines:
C2
|
|
|
|
Minarelli Countershaft
|
|
Peugeot 17 Watt Lighting Coil
|
|
Peugeot Crankshaft Nut - Clutch Side
|
|
Peugeot Outer Nylon Clutch Washer
|
|
Our Price: $50.60
|
|
|
|
Our Price: $27.00
|
|
|
|
Our Price: $6.33
|
|
|
|
Our Price: $8.86
|
|
|
|
|
|
|
NOS original Minarelli countershaft for Variator Engine.
Applicable to the following Minarelli engines:
C2
|
NOS original Peugeot lighting coil. 17watt for 5 coil type magneeto.
Applicable to the following Peugeot models:
102
103SP
TSM
|
NOS original Peugeot crankshaft nut (clutch retaining Nut).
Applicable to the following Peugeot models:
102
103
TSM
|
NOS original Peugeot outer clutch washer. Made of nylon.
Applicable to the following Peugeot models:
102
103
TSM
|
|
|
|
Peugeot Clutch Weight Holding plate Assembly
|
|
Peugeot Reedvalve - 30 Mph Model
|
|
Peugeot Clutch End Washer for Non Variator Clutch
|
|
Top Performance Upper Con Rod Needle Bearing
|
|
Our Price: $55.00
|
|
|
|
Our Price: $22.00
|
|
|
|
Our Price: $2.53
|
|
|
|
Our Price: $9.00
|
|
|
|
|
|
|
NOS original Peugeot Clutch weight holder Assembly. Assembly includes 2 # 51893 needle bearings, 1 #45750 inner sleeve, 1 # 69829 spacer installed.
Applicable to the following Peugeot models:
103
TSM
|
NOS original Peugeot reedvalve for 30 mph (U3) models.
Applicable to the following Peugeot models:
103
TSM
|
NOS original Peugeot clutch end washer for non variator models.
Applicable to the following Peugeot models:
102
|
TOP Performance racing needle bearing for upper crankshaft con rod.
12 x 15 x 15 mm.
Applicable to Puch, Peugeot, Tomos , as well as others
|
|
|
|
Italian made Foot Pegs flip up
|
|
Exhaust Header Tomos High Performance
|
|
|
|
|
|
Our Price: $19.00
|
|
|
|
Our Price: $20.00
|
|
|
|
|
|
Best Quality Italian Pegs we could find. These are the type that have a stud to mount them, So either drill a hole or replace your shock mount bolts to install them.
|
28 mm Exhaust header Tomos a-3 and a-35 engines. Use for making performance exhaust for these models. Please note that the flange angle on this header is not compatible with a-55 engines .
|
|
|
